LineageOS 15.0 ROM for Xiaomi Redmi Note 3 (Kenzo/Kate) Android Oreo 8.0 

Today we will give you guide on how to update Lineage os 15 Redmi Note 3 XDA (Kenzo/Kate). Official Lineage OS 15.0 ROM is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS 15.0 ROM does still include various hardware-specific code, which is also slowly being open-sourced anyway. Also, you guys can download the LineageOS 14.1 Redmi Note 3 Nougat version in your device as well.


First Check Xiaomi Redmi Note 3 Specification. 

The Smartphone carried out with an AMOLED of 5.5-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. However, it has a PPI of ~403 pixels density per inch.

The Xiaomi Redmi Note 3 comes along with Hexa-core(4x1.4GHz &2x1.8GHz) which packs up with Qualcomm MSM8956 Snapdragon 650 chipset. However, you can upgrade via a microSD card slot upto 256GB. The Smartphone carries out with 2GB of RAM with 16GB of internal memory in standard edition. The device picks up the 3GB of RAM and 32GB of internal memory. Xiaomi Redmi Note 3 packs up with 16-Megapixel primary camera on the rear and a 5-megapixel of front shooter for selfies.
The Xiaomi Redmi Note 3 runs on Android 6.0.1(Marshmallow). The device comes with 4050mAh power non-removable battery. The Smartphone covers 150 x 76 x 8.7 mm dimensions (height x width x thickness) and weight 164.00 grams.
The Xiaomi Redmi Note 3 is Hybrid-dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, OTG, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The Xiaomi Redmi Note 3 sensors include Compass, Proximity sensor, Accelerometer, Gyrometer, as well as Fingerprint sensors are also at the bottom of the smartphone. The Smartphones carries with non-breakable Corning Gorilla Glass 4. The Smartphone also carries out the Fast Charging(Quick charge 2.0) which is now a days common.
This is all about the redmi note 3. As we have finally got up the Redmi Note 3 Lineage OS 15 update and now you can download it from the below link. So let's get started with the guide.   
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a Xiaomi Redmi Note 3(Kenzo/Kate) requires the bootloader to be unlocked on the Xiaomi Redmi Note 3(Kenzo/Kate) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.


Official Lineage OS Oreo Xiaomi Redmi Note 3 ROM Status (Kenzo/Kate) Android Oreo 8.0:
WHAT’S WORKING:
– Wifi
– NFC
– Calls and Data
– Bluetooth
– Camera
– Video Playback
– Audio
– Sensors
– Flash
– GPS
– Fingerprint
– LED
– Volte
– Camcorder
KNOWN PROBLEMS:
– Goodix fp Sensor

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS on them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps?

See also: MIUI 9 Feedback, Bugs Fixed, New Releases, Beta Testers Working Properly  



So, here’s the guide:

TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS15 Kenzo on Xiaomi Redmi Note 3 (Kenzo/Kate) using TWRP recovery.

How to Install an LineageOS on Xiaomi Redmi Note 3 (Kenzo/Kate) Android Oreo 8.0

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.
4. Now, go back to TWRP main menu, tap on "Install" and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  • After selecting the .zip file, do "Swipe to Confirm Flash" on the bottom of the screen to begin the custom ROM installation process. This may take some time.
  • So, finally, when your ROM successfully flashed, you’ll see "Wipe cache/dalvik" option. Thus, select it and then do "Swipe to wipe" on the bottom of the screen.
  • Hit the "Back" button once cache & dalvik wipe completes. Also, hit the "Back" button on-screen and then select "Reboot System" button.

Download - OFFICIAL LINEAGE OS 15.0 ROM for Xiaomi Redmi Note 3 (Kenzo/Kate)



Feedback from our Team & Users 

So, many of you guys are waiting for the Official Lineage OS for Xiaomi Redmi Note 3. As, we are looking for constantly searching for "Kenzo/Kate" (basically a codename for Xiaomi Redmi Note 3). So, after hearing from the users the first official build is however, as good as the MIUI 8.2 developer. The users also confirms that MIUI 8.2 almost has no lag or boot loops. As, we are happy to tell you that now you can download and install MIUI 9 on your devices. 

Feedback from our team is that some of us are not happy with the images clicked with there respective smartphone main cameras. Since, users are quite happy with performance of Lineage OS. Also, our team expect that LineageOS soon give update of LineageOS 15.1 Oreo for Xiaomi Redmi Note 3. Some users tweeted us that Volte is not working and some issues are coming with Network setting. So, Volte is now woking propely. Now talking about the Fingerprint sensors the Fingerprint is also, working properly in redmi note 3.

So, what's your decision of installing LineageOS ROM? Did you guys have used the LineageOS ROM if yes than do comment in the comment section about your experience. If you have some more cooler things to share it with us then let us know? Feedbacks of users is very much important before installing any ROM. So, these are Feedback from team and hope you guys enjoyed and excited to install LineageOS ROM.

Share To:

official lineageos

Post A Comment:

0 comments so far,add yours