Official LineageOS

Official LineageOS | LineageOS ROMs

Wednesday, June 14, 2017

{Download} Official LineageOS ZUK Z1 (Ham) Nougat 7.1.1

LineageOS ROM for ZUK Z1 (Ham) Nougat 7.1.1


Today we will give you guide on ZUK Z1. Official LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

First Check ZUK Z1 Specification. 

The smartphone comes with a IPS LCD of 5.5-inch touchscreen display with a resolution of 1080 pixel by 1920 pixels. However, it has a PPI of 401 pixels density per inch.
The ZUK Z1 comes along with 2.5GHz quad-core Qualcomm Snapdragon 801 processor and with 3GB of RAM. The Smartphone packs up with 64GB of internal storage. However, you can upgrade up to 2000GB via a microSD card. ZUK Z1 packs a 13-Megapixel primary camera on the rear and an 8-megapixel front shooter for selfies.
The ZUK Z1 runs on Android 6 and comes with  4100mAh power non-removable battery. The Smartphone covers 155.7 x 77.3 x 8.9 mm dimensions (height x width x thickness) and weight 170.00 grams.
The ZUK Z1 is a dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, Bluetooth, NFC, USB OTG, 3G and 4G (LTE networks) these all are a lot of Connectivity options. The ZUK Z1 sensors include Compass Fingerprint, Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a ZUK Z1 (ham) requires the bootloader to be unlocked on the ZUK Z1 (ham) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Official Lineage OS ROM Status for ZUK Z1(ham) Nougat 7.1 Custom ROM:
WHAT’S WORKING:
– Working
KNOWN PROBLEMS:
– Not Distinguished

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
Let’s see how to flash a LineageOS ROM on ZUK Z1 (ham) using TWRP recovery.


How to Install an official LineageOS on ZUK Z1 (ham) Android 7.1.1

    1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
    2. Now boot your Android device into TWRP recovery.
    3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.
      └ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.
    4.  Now, go back to TWRP main menu, tap on "Install" and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.
  •  So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the "Back" button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select "Reboot System" button.

No comments:

Post a Comment