Official LineageOS

Official LineageOS | LineageOS ROMs

Friday, June 9, 2017

{Download} Official LineageOS OPPO N3 (N3) Nougat 7.1.1

LineageOS 14.1 ROM for OPPO N3 (N3) Nougat 7.1.1


Today we will give you guide on OPPO N3 (N3). Official LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

First Check OPPO N3 Specification. 

The Smartphone carried out with an IPS LCD of 5.5-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. However, it has a PPI of ~403 pixels density per inch.
The OPPO N3 comes along with 2.3GHz quad-core Qualcomm MSM8974AA Snapdragon 801 processor and with 2GB of RAM with 32GB internal memory. However, you can upgrade via a microSD card slot up to 256GB. OPPO N3 packs a 13-Megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.
The OPPO N3 runs on Android 4.3.3(Kitkat). The device comes with 3000mAh power removable battery. The Smartphone covers 161.2 x 77 x 9.9 mm dimensions (height x width x thickness) and weight 192.00 grams.
The OPPO N3 is a dual SIM (GSM) smartphone that accepts a Nano/Micro-SIM. Wi-Fi, GPS, OTG, NFC, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The OPPO N3 sensors include Compass, Proximity sensor, Accelerometer, Gyrometer & features a Fingerprint sensors also. The Smartphones carries with non-breakable Corning Gorilla Glass 3. The Smartphone also carries out the Fast Charging which is nowadays common.
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on an OPPO N3 (N3) requires the bootloader to be unlocked on the OPPO N3 (N3) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Official Lineage OS 14.1 ROM Status for OPPO N3 (N3) Nougat 7.1 Custom ROM:
WHAT’S WORKING:
– Working
KNOWN PROBLEMS:
– Not Distinguished

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS ROM on OPPO N3 (N3) using TWRP recovery.

How to Install an official LineageOS on OPPO N3 (N3) Android 7.1.1

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.
4. Now, go back to TWRP main menu, tap on "Install" and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  • After selecting the .zip file, do "Swipe to Confirm Flash" on the bottom of the screen to begin the custom ROM installation process. This may take some time.
  • So, finally, when your ROM successfully flashed, you’ll see "Wipe cache/dalvik" option. Thus, select it and then do "Swipe to wipe" on the bottom of the screen.
  • Hit the "Back" button once cache & dalvik wipe completes. Also, hit the "Back" button on-screen and then select "Reboot System" button.

No comments:

Post a Comment