LineageOS 14.1 ROM for Nextbit Robin (ether) (Sheildtablet) Nougat 7.1.1


Today we will give you guide on Nextbit Robin (ether). Official LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

First Check Nextbit Robin Specification. 

The Smartphone carried out with an AMOLED of 5.20-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. However, it has a PPI of ~380 pixels density per inch.
The Nextbit Robin comes along with 2.0GHz hexa-core Qualcomm MSM8939 Snapdragon 808 processor and with 3GB of RAM with 32GB internal memory. However, you cannot upgrade via a microSD card. Nextbit Robin packs a 13-Megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.
The Nextbit Robin runs on Android 6.0.1(Marshmallow). The device comes with 2680mAh power non-removable battery. The Smartphone covers 149.00 x 72.00 x 7.00 mm dimensions (height x width x thickness) and weight 170.00 grams.
The Nextbit Robin is a dual SIM (GSM) smartphone that accepts a Nano/Micro-SIM. Wi-Fi, GPS, OTG, NFC, Bluetooth, 3G and 4G LTE Networks these all are a lot of Connectivity options. The Nextbit Robin sensors include Compass, Proximity sensor, Accelerometer, Gyrometer & features a Fingerprint sensors also. The Smartphones carries with non-breakable Corning Gorilla Glass 3. The Smartphone also carries out the Fast Battery Charging which is nowadays common.
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a Nextbit Robin (ether) requires the bootloader to be unlocked on the Nextbit Robin (ether) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Official Lineage OS 14.1 ROM Status for Nextbit Robin (ether) Nougat 7.1 Custom ROM:
WHAT’S WORKING:
– Working
KNOWN PROBLEMS:
– Not Distinguished

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? 
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS ROM on Nextbit Robin (ether) using TWRP recovery.


How to Install an official LineageOS on Nextbit Robin (ether) Android 7.1.1

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.
4. Now, go back to TWRP main menu, tap on "Install" and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  • After selecting the .zip file, do "Swipe to Confirm Flash" on the bottom of the screen to begin the custom ROM installation process. This may take some time.
  • So, finally, when your ROM successfully flashed, you’ll see "Wipe cache/dalvik" option. Thus, select it and then do "Swipe to wipe" on the bottom of the screen.
  • Hit the "Back" button once cache & dalvik wipe completes. Also, hit the "Back" button on-screen and then select "Reboot System" button.
Download - OFFICIAL LINEAGE OS 14.1 FOR Nextbit Robin (ether)



Feedback from our Team & Users 

So, many of you guys are waiting for the Official Lineage OS for Nextbit Robin. As, we are looking for constantly searching for "Ether" (basically a codename for Nextbit Robin). So, after hearing from the users the first official build is however, as good as the MIUI 8.2 developer. The users also confirms that the MIUI 8.2 almost no lag or boot loops. As, we are happy to tell you that now you can download and install MIUI 9 on your devices. 

Feedback from our team is that some of us are not happy with the images clicked with there respective smartphone main cameras. Since, users are quite happy with performance of Lineage OS. Also, our team expect that LineageOS soon give update of LineageOS 15.0 oreo for Nextbit Robin. 


Share To:

official lineageos

Post A Comment:

0 comments so far,add yours